There is now a more helpful video of a full build of the Jungle Cruise sign that includes the assembly and installation of this Jingle “i” add-on.
Your Jingle Cruise “i” should have 2 magnets. One is already glued on the back side of the “i” and the other is loose but may be magnetically held to other one. Please remove that 2nd magnet but remember which side it was being held on to.. as this is what side will need to be glued down on the back of the sign.
A small package of epoxy glue may have been provided. If not, please use either epoxy or super (CA) glue for best results.
You’ll want to place the “i” just over the “u” in the word Jungle on the front of the sign. Ensure it covers the entire “u” character.
Now, hold that in place and flip the sign around and place the 2nd magnet on the back near where the “i” is now. The magnet should magnetically attach to the “i” and hold it in place.
You may need to adjust the “i” on the front of the sign to ensure it’s placed properly still. Please do so and the magnet on the back should slide along with it, still magnetically holding onto it.
Once you have it where you want it, carefully remove the magnet on the back and add glue exactly where it was positioned. (You may need to mark where the magnet was before removing it.) Now, quickly replace the 2nd magnet on top of where you put the glue and let it sit there for a few mintues.
Once the glue is dried, you should now be able to remove the “i” from the front of the sign and can now add it back whenever you desire, or more importantly, around the Christmas holiday.
Related Topics
Please check out these topics below for more help. However, if you have any further questions, feel free to contact me.