Assembly

Build Kit: Entryway Plaque Sign

This is a video of a live build of this sign. It details the assembly instructions of all the parts for the Entryway Plaque sign. Included below are details on the spray paint colors used, tools, glue, and more. Note:…

Built Kit: Adventureland Sign

This video details the assembly instructions of all the parts and accessories for the Adventureland sign. Included are details on suggested tools & glue, and more. I also did a live build of this sign.. so if you prefer to…

Build Kit: Small World Sign

Below is a video detailing the assembly instructions of all the parts and accessories for the It’s A Small World sign. Included are details on suggested tools & glue, and more. I also did a live build of this sign..…

Build Kit: Jingle Cruise Sign

This is a long video detailing the assembly instructions of all the parts and accessories for the Jungle Cruise sign. Included are details on the markers used for coloring, tools, glue, and more. I also did a live build of…

Build Kit: Haunted Mansion Exit Sign

The first thing you'll need to do is to ensure you have all of the parts needed. The parts should have been left and tape in the original sheet they were laser cut in, which makes it easier for you to notice if anything is missing.

Install: Jingle Cruise “i” Add-on

Your Jingle Cruise "i" should have 2 magnets. One is already glued on the back side of the "i" and the other is loose but may be magnetically held to other one. Please remove that 2nd magnet but remember which side it was being held on to.. as this is what side will need to be glued down on the back of the sign.

Install: Jungle Cruise Lanterns

This will guide you through the process of gluing the LED lanterns on the main base of the Jungle Cruise sign. Align the lanterns with the sign so that the "L" brackets on the lanterns are facing as shown in the photo above.

Assemble: Laffite’s Landing Sign

This is a short video detailing the assembly instructions of the Laffite's Landing sign. The only parts you will need to attach to the sign are the hooks. The eye hooks have a nut and will be inserted in the top of the metal straps. These will hang from the other hooks, which get screwed into the post that hangs just above the mains part of the sign.